Home » Forums » Aviation photography » Unsharp pictures
Tobias Emig Member Joined in January 2015 Posts: 12 |
Posted 25 May 2017 - 14:36 CET |
Hi again,
I just expanded my equipment with a Nikon D750. So today in the early morning hours I took some pictures at the airport. When I saw the pics at home on the PC screen I was very disapointed. I saw that nearly 3/4 of the pics were motion blurred/not sharp. Can you help me to avoid this mistake?
Camera setting:
Nikon D750 + Nikkor 200-500VR ISO 400-160 f7,1 exposure was between 1/400 and 1/800 VR set on (normal)
if you need further pictures or informations please contact me
with best regards Tobi
|
Tobias Emig Member Joined in January 2015 Posts: 12 |
Posted 25 May 2017 - 15:06 CET |
Unfortunately I can't add pictured to my post. Everytime I attached a picture, a white page appeared and the picture was not attached to thhe post. If you need some pictures for example please contact me |
Tobias Emig Member Joined in January 2015 Posts: 12 |
Posted 25 May 2017 - 15:16 CET |
Unfortunately I can't add pictured to my post. Everytime I attached a picture, a white page appeared and the picture was not attached to the post. If you need some pictures for example please use the link below:
https://www.dropbox.com/sh/ugr5qohlcyi4fp8/AABiecE3CdMLE6OZfwoLeRO9a?dl=0 |
Igor Kmet Full member Joined in September 2013 Posts: 99 |
Posted 25 May 2017 - 18:27 CET |
How was set FOCUSING MODE ?
It should be CONTINIOUS, FOCUSING PRIORITY, CENTRAL FOCUS POINT... |
Igor Kmet Full member Joined in September 2013 Posts: 99 |
Posted 25 May 2017 - 18:29 CET |
Shutter speed 1/400 neds ( depending on the speed of the plane ) panning technique..
|
Tobias Emig Member Joined in January 2015 Posts: 12 |
Posted 29 May 2017 - 11:50 CET |
Hi Igor,
Focussing Mode is already set to AF-C. The Shutter speed (on sunny days) is usually around 1/1000 and 1/640. I always pan with the plane even if it´s taxiing slowly. The VR on my lens is alway set to ON and NORMAL. I can´t really understand what I´m doing wrong at the moment |
Log in to post in the forum.